Bilgin, N., Demircin, M.A., Copur, H., Balci, C., Tuncdemir, H., Akcin, N. (2006), “Dominant rock properties affecting the performance of conical picks and the comparison of some experimental and theoretical results”, International Journal of Rock Mechanics and Mining Sciences, Vol. 43, No. 1, pp. 139-156.10.1016/j.ijrmms.2005.04.009
Jeong, H.Y., Jeon, S.W. (2018), “Linear cutting machine test for assessment of the cutting performance of a pick cutter in sedimentary rocks”, Journal of Korean Tunnelling and Underground Space Association, Vol. 20, No. 1, pp. 161-182.
Kim, K.S., Kim, J.H., Jeong, L.C., Lee, I.M., Cho, G.C. (2015), “Development for prediction system of TBM tunnel face ahead using probe drilling equipment and drilled hole imaging equipment.”, Journal of Korean Tunnelling and Underground Space Association, Vol. 17, No. 3, pp. 393-401.10.9711/KTAJ.2015.17.3.393
Kim, K.Y., Kim, S.K, Kim, C.Y., Kim, K.S. (2009a), “Prediction of rock mass strength ahead of tunnel face using hydraulic drilling data”, Tunnel and Underground Space, Vol. 19, No. 6, pp. 479-489.
Kim, N.Y., Kim, S.H., Chung, H.S. (2001), “Correlation between drilling parameter and tunnel support pattern using jumbo drill”, Journal of Korean Tunnelling and Underground Space Association, Vol. 3, No. 4, pp. 17-24.
Kim, S.W., Choi, E.K., Lee, K.H. (2009b), “Classification of rocks in the Cenozoic unconsolidated sediments and evaluation of aggregates”, Proceedings of the GSK Conference 19~30th, October, Jeju, pp. 82.
Kim, Y., Kim, H.M., Lee, S.S. (2019), “An analysis of excavation cycle time for Korean tunnels and the comparison with the standard of construction estimate”, Journal of Korean Tunnelling and Underground Space Association, Vol. 21, No. 1, pp. 137-153.
Kwon, K.B., Song, C.H., Yun, J.S., Hwang, U.K. (2013), “Market and technical trend of rock drilling machine”, Journal of Drive and Control, Vol. 10, No. 3, pp. 36-40.
MAF (Ministry of Agriculture and Forest) (2005), “Development of environment-friendly boring revegetation measures in quarry area”, Research Report, pp. 1-151.
MOLIT (Ministry of Land, Infrastructure and Transport) and KICT (Korea Institute of Civil Engineering and Building Technology) (2018), Standard of construction estimate for civil, building and machine facility, Korea Institute of Civil Engineering and Building Technology, Goyang, pp. 407-414.
Paone, J., Madson, D., Bruce, W.E. (1969), “Drillability studies-laboratory percussive drilling”, USBM RI 7300.
Park, J.Y., Kim, J.H., Bae, S.H., Lee, J.S., Kim, T.G. (2007), “Analysis of geological engineering components and engineering characteristics of Jeoggagri conglomerate”, Proceedings of the Korean Society of Economic and Environmental Geology Spring Conference, 25~27th, April, Kyeongju, pp. 292-295.
Park, Y., Yoo, S.H., Kim, K.S. (2006), “DEM estimation of mechanical properties of conglomeratic rocks”, Proceeding of the Korean Geotechical Society Spring Conference, 24~25th, March, Seoul, pp. 42-50.
Tandanand, S., Unger, H.F. (1975), “Drillability determination-A drillability index of percussive drills”, USBM RI 8073.10.1016/0148-9062(76)90798-1
Teale, R. (1965), “The concept of specific energy in rock drilling”, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, Vol. 2, No. 1, pp. 57-73.10.1016/0148-9062(65)90022-7
Thuro, K. (1997), “Drillability prediction: geological influences in hard rock drill and blast tunnelling”, Geological Rundschau, Vol. 86, No. 2, pp. 426-438.10.1007/s005310050151
Thuro, K., Plinninger, R.J. (2003), “Hard rock tunnel boring, cutting, drilling and blasting: rock parameters for excavatability”, In: Merwe JN, editor. Proceedings of the 10th International ISRM Congress on Technology Roadmap for Rock Mechanics, South African Institute of Mining and Metallurgy, pp. 1227-1233.
- Publisher :Korean Tunneling and Underground Space Association
- Publisher(Ko) :한국터널지하공간학회
- Journal Title :Journal of Korean Tunnelling and Underground Space Association
- Journal Title(Ko) :한국터널지하공간학회 논문집
- Volume : 21
- No :4
- Pages :561-571
- Received Date :2019. 05. 22
- Revised Date :2019. 06. 13
- Accepted Date : 2019. 06. 21