All Issue

2019 Vol.21, Issue 4 Preview Page

July 2019. pp. 545-560
Abstract


References
1 

ASTM (2015). ASTM C143, Standard test method for slump of hydraulic-cement concrete, C143/C143M- 15a, West Conshohocken, PA, ASTM International.

2 

Budach, C. (2012), Untersuchungen zum erweiterten Einsatz von Erddruckshilden in grobkörnigem Lockergestein, Ph.D. Thesis, Ruhr-Universität Bochum, pp. 174-180.

3 

Budach, C., Thewes, M. (2015), “Application ranges of EPB shields in coarse ground based on laboratory research”, Tunnelling and Underground Space Technology, Vol. 50, pp. 296-304.

10.1016/j.tust.2015.08.006
4 

EFNARC, A. (2005). Specifications and Guidelines for the use of specialist products for Mechanized Tunnelling (TBM) in Soft Ground and Hard Rock. Recommendation of European Federation of Producers and Contractors of Specialist Products for Structures.

5 

Gharahbagh, E.A., Rostami, J., Palomino, A.M. (2011), “New soil abrasion testing method for soft ground tunneling applications”, Tunnelling and Underground Space Technology, Vol. 26, No. 5, pp. 604-613.

10.1016/j.tust.2011.04.003
6 

Gharahbagh, E.A., Rostami, J., Talebi, K. (2014), “Experimental study of the effect of conditioning on abrasive wear and torque requirement of full face tunneling machines”, Tunnelling and Underground Space Technology, Vol. 41, pp. 127-136.

10.1016/j.tust.2013.12.003
7 

Hedayatzadeh, M., Rostami, J., Peila, D., Forough, O., Salazar, C.G.O. (2017), “Development of a soil abrasion test and analysis of impact of soil conditioning on tool wear for soft ground mechanized tunneling using EPB machines”, Proceedings of the World Tunnel Congress 2017, Bergen, pp. 1-6.

8 

Herrenknecht, M., Thewes, M., Budach, C. (2011), “The development of earth pressure shields: from the beginning to the present/Entwicklung der Erddruckschilde: Von den Anfängen bis zur Gegenwart”, Geomechanics and Tunnelling, Vol. 4, No. 1, pp. 11-35.

10.1002/geot.201100003
9 

Jakobsen, P.D., Bruland, A., Dahl, F. (2013a), “Review and assessment of the NTNU/SINTEF Soil Abrasion Test (SAT™) for determination of abrasiveness of soil and soft ground”, Tunnelling and Underground Space Technology, Vol. 37, pp. 107-114.

10.1016/j.tust.2013.04.003
10 

Jakobsen, P.D., Langmaack, L., Dahl, F., Breivik, T. (2013b), “Development of the Soft Ground Abrasion Tester (SGAT) to predict TBM tool wear, torque and thrust”, Tunnelling and Underground Space Technology, Vol. 38, pp. 398-408.

10.1016/j.tust.2013.07.021
11 

Kim, D.Y., Kang, H.B., Shin, Y.J., Jung, J.H., Lee, J.W. (2018a), “Development of testing apparatus and fundamental study for performance and cutting tool wear of EPB TBM in soft ground”, Journal of Korean Tunnelling and Underground Space Association, Vol. 20, No. 2, pp. 453-467.

12 

Kim, T.H.., Kwon, Y.S., Chung, H., Lee, I.M. (2018b), “A simple test method to evaluate workability of conditioned soil used for EPB Shield TBM”, Journal of Korean Tunnelling and Underground Space Association, Vol. 20, No. 6, pp. 1049-1060.

13 

Langmaack, L. (2000), “Advanced technology of soil conditioning in EPB shield tunneling”, Proceedings of North American Tunneling Congress 2000, Boston, pp. 525-542.

14 

Lee, H., Shin, D., Kim, D.Y., Shin, Y.J., Choi, H. (2019), “Prediction of EPB shield TBM performance using a lab scale excavation test with different soil conditions”, Tunnels and Underground Cities: Engineering and Innovation meet Archaeology: Proceedings of the World Tunnel Concgress 2019, Naples, pp. 2446-2454.

10.1201/9780429424441-259
15 

Maidl, U. (1995), Erweiterung der Einsatzbereiche der Erddruckschilde durch bodenkonditionierung mit Schaum, Ph.D. Thesis, Institut für Konstruktiven Ingenieurbau, Ruhr-Universität Bochum, pp. 1-184.

16 

Mori, L. (2016), Advancing understanding of the relationship between soil conditioning and earth pressure balance tunnel boring machine chamber and shield annulus behavior, Ph.D. Thesis, Colorado School of Mines, pp. 1-191.

17 

Mori, L., Alavi, E., Mooney, M. (2017), “Apparent density evaluation methods to assess the effectiveness of soil conditioning”, Tunnelling and Underground Space Technology, Vol. 67, pp. 175-186.

10.1016/j.tust.2017.05.006
18 

Mori, L., Mooney, M., Cha, M. (2018), “Characterizing the influence of stress on foam conditioned sand for EPB tunneling”, Tunnelling and Underground Space Technology, Vol. 71, pp. 454-465.

10.1016/j.tust.2017.09.018
19 

Peila, D., Oggeri, C., Borio, L. (2009), “Using the slump test to assess the behavior of conditioned soil for EPB tunneling”, Environmental and Engineering Geoscience, Vol. 15, No. 3, pp. 167-174.

10.2113/gseegeosci.15.3.167
20 

Psomas, S. (2001), Properties of foam/sand mixtures for tunnelling applications, Master Thesis, England: St Hugh’s College, University of Oxford, pp. 1-147.

21 

Quebaud, S., Sibai, M., Henry, J.P. (1998), “Use of chemical foam for improvements in drilling by earth-pressure balanced shields in granular soils”, Tunnelling and Underground Space Technology, Vol. 13, No. 2, pp. 173-180.

10.1016/S0886-7798(98)00045-5
22 

Rostami, J., Gharahbagh, E.A., Palomino, A.M., Mosleh, M. (2012), “Development of soil abrasivity testing for soft ground tunneling using shield machines”, Tunnelling and Underground Space Technology, Vol. 28, pp. 245-256.

10.1016/j.tust.2011.11.007
23 

Salazar, C.G.O., Todaro, C., Bosio, F., Bassini, E., Ugues, D., Peila, D. (2018), “A new test device for the study of metal wear in conditioned granular soil used in EPB shield tunneling”, Tunnelling and Underground Space Technology, Vol. 73, pp. 212-221.

10.1016/j.tust.2017.12.014
24 

Vinai, R., Oggeri, C., Peila, D. (2008), “Soil conditioning of sand for EPB applications: A laboratory research”, Tunnelling and Underground Space Technology, Vol. 23, No. 3, pp. 308-317.

10.1016/j.tust.2007.04.010
Information
  • Publisher :Korean Tunneling and Underground Space Association
  • Publisher(Ko) :한국터널지하공간학회
  • Journal Title :Journal of Korean Tunnelling and Underground Space Association
  • Journal Title(Ko) :한국터널지하공간학회 논문집
  • Volume : 21
  • No :4
  • Pages :545-560
  • Received Date :2019. 05. 16
  • Revised Date :2019. 06. 26
  • Accepted Date : 2019. 07. 05