All Issue

2020 Vol.22, Issue 2

Research Paper


March 2020. pp. 145-154
Abstract


References
1 

ACI Committee 318 (1999), Building code requirements for reinforced concrete (ACI318-99), American Concrete Institute.

2 

Ha, T.W., Kim, D.Y., Shin, Y.W., Yang, H.S. (2008), "Evaluation methods of shotcrete lining stresses considering steel rib capacities by two-dimensional numerical analysis", Journal of Korean Tunnelling and Underground Space Association, Vol. 10, No. 3, pp. 269-282.

3 

Jung, H.S., Shin, Y.W., Song, K.I., Shin, J.H. (2016), "Performance evaluation of lattice girder depending on the quality of steel", Journal of Korean Tunnelling and Underground Space Association, Vol. 18, No. 2, pp. 165-173.

10.9711/KTAJ.2016.18.2.165
4 

KICT (1996), Application of lattice girders in tunneling, Korea Institute of Civil Engineering and Building Technology.

5 

Kim, D.G., Bae, G.J. (2008), "Development of a laboratory testing method for evaluating the loading capability of lattice girder", Journal of Korean Tunnelling and Underground Space Association, Vol. 10, No. 4, pp. 371-382.

6 

Kim, D.G., Bae, G.J., Kim, D.R., Choi, Y.H. (2007), "Loading capacity of lattice girders in material property", Proceedings of the KSCE 2007 Civil Expo Korean Society of Civil Engineers, Daegu, pp. 1076-1079.

7 

Kim, D.G., Lee, S.H., Choi, Y.N. (2008), "Evaluation of loading capacity of lattice girder according to laboratory testing method", Proceedings of the Korean Geo-Environmental Society, Seoul, pp. 399-406.

8 

Kim, D.G., Lee, S.H., Kim, N.Y. (2009), "Status and capacity of lattice girder", Proceedings of the Korean Geo-Environmental Society, Seoul, pp. 374-380.

9 

Kim, H.J., Song, K.I., Jung, H.S., Shin, Y.W., Shin, J.H. (2018), "Performance evaluation of lattice girder and significance of quality control", Tunnelling and Underground Space Technology, Vol. 82, pp. 482-492.

10.1016/j.tust.2018.08.058
10 

Kim, S.J., Han, T.H., Baek, J.S., Kang, Y.J. (2013), "Evaluation of the structural performance of tetragonal lattice girders", International Journal of Steel Structures, Vol. 13, No. 1, pp. 31-47.

10.1007/s13296-013-1004-y
11 

KS F 2408 (2016), Standard test method for flexural strength of concrete, National Institute of Technology and Standards, Korea.

12 

MOLIT (2011), The revision of the road-design guideline (the chapter of tunnel), Ministry of Land, Transport and Maritime Affairs.

13 

Moon, H.D., Paik, Y.S., Bae, G.J. (1997), "An experimental study on the characteristics of a composite structure of lattice girder and shotcrete", Geotechnical Engieering, Vol. 13, No. 2, pp. 155-168.

14 

Raphael, J.M. (1984), "Tensile strength of concrete", ACI Journal, Vol. 81, No. 2, pp. 158-165.

10.14359/10653
15 

Yoo, C.S., Kim, Y.J., Bae, G.J., Moon, H.D. (1997), "An experimental study on load bearing capacity of lattice girder as a steel support in tunnelling", Journal of the Korean Geotechnical Society, Vol. 13, No. 4, pp. 163-175.

Information
  • Publisher :Korean Tunneling and Underground Space Association
  • Publisher(Ko) :한국터널지하공간학회
  • Journal Title :Journal of Korean Tunnelling and Underground Space Association
  • Journal Title(Ko) :한국터널지하공간학회 논문집
  • Volume : 22
  • No :2
  • Pages :145-154
  • Received Date :2020. 01. 14
  • Revised Date :2020. 03. 18
  • Accepted Date : 2020. 03. 20