All Issue

2019 Vol.21, Issue 4 Preview Page

Research Paper

July 2019. pp. 519-534


Barton, N. (1999), “TBM performance estimation in rock using QTBM”, Tunnels and Tunnelling International, Vol. 31, No. 9, pp. 30-34.


Bruland, A. (2000), Hard rock tunnel boring: Background and discussion, Ph.D. Thesis, Norwegian University of Science and Technology, pp. 14-31.


Chang, S.H., Choi, S.W., Lee, G.P., Bae, G.J. (2011), “Rock TBM design model derived from the multi-variate regression analysis of TBM driving data”, Journal of Korean Tunnelling and Underground Space Association, Vol. 13, No. 6, pp. 531-555.


Cho, M.S., Woo, D.C., Kim, K.K., Lee, J.M. (2003), “Applicability analysis of empirical methods for the calculation of TBM advance rate”, Tunnel and Underground Space, Vol. 13, No. 4, pp. 260-269.


Farmer, I.W., Glossop, N.H. (1980), “Mechanics of disc cutter penetration”, Tunnels and Tunnelling International, Vol. 12, No. 6, pp. 22-25.


Graham, P.C. (1976), Rock exploration for machine manufacturers. In: Bieniawski, Z.T. (Ed.), Exploration for Rock Engineering. Balkema, Johannesburg, pp. 173-180.


Hamidi, J.K., Shahriar, K., Rezai, B., Rostami, J. (2010), “Performance prediction of hard rock TBM using rock mass rating (RMR) system”, Tunnelling and Underground Space Technology, Vol. 25, No. 4, pp. 333-345.


Han, J.G., Kim, J.S., Lee, Y.K., Hong, K.K. (2011), “Comparison of empirical model for penetration rate prediction using case history of TBM construction”, Journal of the Korean Geosynthetics Society, Vol. 10, No. 4, pp. 61-70.


Hassanpour, J., Rostami, J., Khamehchiyan, M., Bruland, A. (2009), “Developing new equations for performance prediction in carbonate-argillaceous rocks: a case history of Nowsood water conveyance tunnel”, Geomechanics and Geoengineering, Vol. 4, No. 4, pp. 287-297.


Hassanpour, J., Rostami, J., Khamehchiyan, M., Bruland, A., Tavakoli, H.R. (2010), “TBM performance analysis in pyroclastic rocks: A case history of Karaj water conveyance tunnel”, Rock Mechanics and Rock Engineering, Vol. 43, No. 4, pp. 427-445.


Hughes, H.M. (1986), “The relative cuttability of coal-measures stone”, Mining Science and Technology, Vol. 3, No. 2, pp. 95-109.


Jung, H.S., Kang, H.N., Choi, J.M., Chun, B.S. (2010), “Improvement plan of excavation performance based on shield TBM performance prediction models and field data”, Journal of the Korean Geoenvironmental Society, Vol. 11, No. 2, pp. 43-52.


Ramezanzadeh, A., Rostami, J., Kastner, R. (2005), Influence of rock mass properties on performance of hard rock TBMs, RETC, June 27-29, Seattle, Washington, USA.


Ribacchi, R., Lembo-Fazio, A. (2005), “Influence of rock mass parameters on the performance of a TBM in a Gneissic formation (Varzo tunnel)”, Rock Mechanics and Rock Engineering, Vol. 38, No. 2, pp. 105-127.


Tarkoy, P.J. (1986), Practical geotechnical and engineering properties for tunnel-boring machine performance analysis and prediction, Transportation Research Record 1087, Washington, D.C. pp. 62-78.


Tarkoy, P.J. (1973), “Predicting TBM penetration rates in selected rock types”, Proceedings of the 9th Canadian Rock Mechanics Symposium, Montreal, pp. 263-274.

  • Publisher :Korean Tunneling and Underground Space Association
  • Publisher(Ko) :한국터널지하공간학회
  • Journal Title :Journal of Korean Tunnelling and Underground Space Association
  • Journal Title(Ko) :한국터널지하공간학회 논문집
  • Volume : 21
  • No :4
  • Pages :519-534
  • Received Date :2019. 05. 02
  • Revised Date :2019. 06. 14
  • Accepted Date : 2019. 06. 21