Journal of Korean Tunnelling and Underground Space Association ISSN:2233-8292(Print) 2287-4747(Online) 한국터널지하공간학회 논문집

Barton, N. (2002), "Some new Q-value correlations to assist in site characterisation and tunnel design", International Journal of Rock Mechanics and Mining Sciences, Vol. 39, No. 2, pp. 185-216.

Bieniawski, Z.T. (1993), "Classification of rock masses for engineering: The RMR system and future trends", Comprehensive Rock Engineering, Vol. 3, Pergamon Press, Oxford, pp. 553-573.

Brummer, R.K. (1998), Design of orepasses: Methods for determining the useful life of orepasses based on previous experience and case studies, Submitted to CAMIRO Mining Division Limited, Sudbury, January 1998, pp. 55.

Choi, G.B., Lee, J.B., Jeong, C.H., Chang, S.G. (2013), "A case study on the Inje tunnel shaft construction (deepest shaft in Korean road tunnel)", Geotechnical Engineering, Vol. 29, No. 11, pp. 27-34.

Denny, I., Goh, K. (2006), Stability of raisebored shafts - The limitations of the McCracken & Stacey raisebore risk assessment method, AMC Consultant December 2006.

Edelbro, C., Brummer, R., Pierce, M., Sandström, D., Sjöberg, J. (2019), "Raiseboring in difficult rock conditions", Ground Support 2019, Australian Centre for Geomechanics, Perth, pp. 185-198.

Hong, C.S., Lee, H.K., Do, J.Y. (2006), "A case study on the Chungsong pumped-storage power station construction", Proceedings of the Korean Geotechnical Society Fall Conference, Wonju, pp. 169-178.

Hudd, P.S., Martin, D. (2010), "Large diameter raise boring in hard rock - An overview, its applications and consideration", Proceedings of the 2010 Canadian Institute of Mining, Metallurgy and Petroleum Conference, Westmount, pp. 1-48.

Jeong, K.H., Kim, C.S. (2005), "Investigation of shaft excavation method through RBM", SSangyong Technical Institute, Construction Technology, Vol. 36, pp. 38-43.

Jeong, W.C., Kim, S.H., Lee, S.C. (2011), "Case study of underground oil storage cavern - Ulsan underground oil storage", Magazine of Korean Tunnelling and Underground Space Association, Vol. 13, No. 2, pp. 9-23.

Khine, H.Y., Tong, S.Y.M., Chen, Y.K. (2022), "The first circular shaft in Asia with the use of vertical shaft sinking machine", Proceedings of the WTC 2022, Copenhagen, pp. 22-28.

Liu, Z., Meng, Y. (2015), "Key technologies of drilling process with raise boring method", Journal of Rock Mechanics and Geotechnical Engineering, Vol. 7, No. 4, pp. 385-394.

Lyle, R.R. (2017), "Considerations for large-diameter raiseboring", Underground Mining Technology 2017, Australian Centre for Geomechanics, Perth, pp. 581-596.

Marlow, P., Webber, S., Mikula, P.A., Lee, M. (2013), "Bored reinforced piles for raisebore support: Four case studies, and guidelines developed from lessons learnt", Mining Technology, Vol. 122, No. 3, pp. 159-165.

Master Drilling (2019), RD7-400 Raise Borer - Technical Specifications.

McCracken, A., Stacey, T.R. (1989), "Geotechnical risk assessment for large diameter raise-bored shafts", Transactions of Institution of Mining and Metallurgy, Section A: Minding Industry, Vol. 98. pp. A145-A150.

Miranda, D.M. (2020), Shaft stability assessment with numerical simulation, Instituto Superior Tecnico, Lisboa, Portugal, pp. 1-9.

Peck, W.A., Lee, M.F. (2007), "Application of the Q-system to Australian underground metal mines", Proceedings of the International Workshop on Rock Mass Classification in Underground Mining, Vancouver, pp. 129-140.

Peck, W.A., Lee, M.F. (2008), "Stability of raise bored shafts in Australian Mines", Proceedings of the 13th Australian Tunnelling Conference, Melbourne, pp. 331-337.

Penney, A.R., Stephenson, R.M., Pascoe, M.J. (2018), "Raise bore stability and risk assessment empirical database update", Proceedings of the Fourth Australasian Ground Control in Mining Conference (AusRock), Melbourne, pp. 434-445.

Steyn, J., Gerber, R.J., Harrison, A.T., Ferreira, P.H. (2007), "Investigation of the characteristics of thin sprayed liners (TSL) and their use as an additional support medium in block caving mining", Proceedings of the 6th International Symposium on Ground Support in Mining and Civil Engineering Construction, South Africa, pp. 125-144.

Walls, E.J., Joughin, W.C., Paetzold, H.D. (2019), "Geotechnical data analysis to select a feasible method for development of a long axis, large diameter vertical ventilation shaft", Journal of the Southern African Institute of Mining and Metallurgy, Vol. 119, pp 377-384.

Yilmaz, H. (2011), Development of testing methods for comparative assessment of thin spray on liner (TSL) shear and tensile properties, Doctoral Dissertation, University of Witwatersrand, Johannesburg, 176 p.