All Issue

2018 Vol.20, Issue 1 Preview Page
Linear cutting machine test for assessment of the cutting performance of a pick cutter in sedimentary rocks

퇴적층 암석의 픽 커터 절삭성능 평가를 위한 선형절삭시험

Hoyoung Jeong1
,
Seokwon Jeon2*
정 호영1
,
전 석원2*
1Post-Doc Researcher, Dept. of Energy Systems Engineering, Seoul National University
2Professor, Dept. of Energy Systems Engineering, Seoul National University
1서울대학교 에너지시스템공학부 박사후연구원
2서울대학교 에너지시스템공학부 교수
*교신저자. *Corresponding Author. 
31 January 2018. pp. 161-182
PDF XML Citation
Abstract

We carried out a series of linear cutting machine tests to assess the cutting performance of a pick cutter in sedimentary rock. The specimens were Linyi sandstone from China and Concrete (rock-like material, conglomerate). Using the small scaled LCM system, we estimated the cutter force and specific energy under different cutting conditions. The cutter forces (cutting and normal) increased with penetration depth and cutter spacing in two rock types, and it was affected by the strength of specimens. On the other hand, the ratio of the peak cutter force to the mean cutter force was influenced by cutting characteristic and composition of rock rather than rock strength. The cutting coefficient was affected by the friction characteristic between rock and pick cutter rather than the cutting conditions. Therefore, the optimal cutting angle can be determined by considering of cutting coefficient and resultant force of pick cutter. The optimum cutting condition was determined from the relationship between the specific energy and cutting condition. For two specimens, the optimum s/p ratio was found to be two to four, and the specific energy decreased with the penetration depth. The result from this study can be used as background database to understand the cutting mechanism of a pick cutter, also it can be used to design for the mechanical excavator.

Keywords
Linear cutting machine (LCM)
Pick cutter
Cutter force
Linyi sandstone
Concrete

본 연구에서는 퇴적층 암석에서 픽 커터의 절삭성능을 평가하기 위하여 선형절삭시험을 수행하였다. 중국에서 채취된 Linyi사암과 역암을 모사한 콘크리트를 시험체로 사용하였다. 소규모 선형절삭시험장비를 이용하여 다양한 절삭조건하에서 절삭조건에 따른 커터작용력과 비에너지의 변화양상을 평가하였다. 커터작용력은 두 가지 재료 모두에서 압입깊이와 커터간격이 증가함에 따라 증가하는 경향을 나타내었고 재료의 강도에 영향을 받는 것으로 나타났다. 반면 최대작용력과 평균작용력의 비율은 재료의 강도에 영향을 받기 보다는 재료의 구성 물질과 절삭특성에 영향을 받는 것으로 판단되었다. 절삭계수는 암석과 픽 커터의 마찰 특성에 영향을 받으나 절삭조건에는 영향을 받지 않는 것으로 나타났다. 따라서 절삭계수와 픽 커터 작용력의 합력방향에 따라 암석의 특성을 고려한 최적의 절삭각도를 선정해야 할 것으로 판단되었다. 한편 절삭조건에 따른 비에너지의 변화양상으로부터 최적 절삭조건을 규명하였다. 두 가지 재료에서 최적 s/p비는 2~4 범위로 도출되었고, 압입깊이가 증가함에 따라 비에너지는 감소하는 경향을 나타내었다. 본 연구의 결과는 픽 커터의 절삭메커니즘 규명을 위한 데이터베이스로 활용될 수 있으며, 픽 커터를 사용한 기계굴착장비의 설계에 활용될 수 있을 것으로 기대된다.

키워드
선형절삭시험
픽 커터
커터작용력
Linyi사암
콘크리트
References
1
Balci, C., Bilgin, N. (2007), “Correlative study of linear small and full-scale rock cutting tests to select mechanized excavation machines”, International Journal of Rock Mechanics & Mining Sciences, Vol. 44, No. 3, pp. 468-476.
2
Bilgin, N., Demircin, M.A., Copur, H., Balci, C., Tuncdemir, H., Akcin, N. (2006), “Dominant rock properties affecting the performance of conical picks and the comparison of some experimental and theoretical results”, International Journal of Rock Mechanics & Mining Sciences, Vol. 4, No. 1, pp. 139-156.
3
Bilgin, N., Copur, H., Balci, C. (2013), Mechanical Excavation in Mining and Civil Industries, CRC press, London, pp. 89.
4
Chang, S.H., Choi, S.W., Bae, G.J., Jeon, S. (2006), “Performance prediction of TBM disc cutting on granitic rock by the linear cutting test”, Tunnelling and Underground Space Technology, Vol. 21, No. 3, pp. 271.
5
Chang, S.H., Choi, S.W., Park, Y.T., Lee, G.P., Bae, G.J. (2012), “Characterization of the deformation of a disc cutter in linear rock cutting test”, Journal of Korean Tunnelling and Underground Space Association, Vol. 14, No. 3, pp. 197-213.
6
Cho, J.W. (2010), Linear cutting test and numerical study on the assessment of rock cuttability of a TBM disc cutter, Ph.D. Thesis, Seoul National University, pp. 69-70.
7
Choi, S.W., Chang, S.H., Park, Y.T., Lee, G.P. (2014a), “Performance estimation of conical picks with slim design by the linear cutting test (I): depending on attack angle variation”, Journal of Korean Tunnelling and Underground Space Association, Vol. 16, No. 6, pp. 573-584.
8
Choi, S.W., Chang, S.H., Lee G.P., Park, Y.T. (2014b), “Performance estimation of conical picks with slim design by the linear cutting test (II): depending on skew angle variation”, Journal of Korean Tunnelling and Underground Space Association, Vol. 16, No. 6, pp. 585-597.
9
Choi, S.W., Kang, T.H., Chang, S.H., Lee, C.H., Lee, G.P., Kim, C.Y. (2016), “Performance estimation depending on the insert size of conical picks by linear cutting test”, Journal of Korean Tunnelling and Underground Space Association, Vol. 18, No. 2, pp. 221-233.
10
Choi, S.W., Chang, S.H., Lee, C.H., Lee, G.P., Bae, Y.H., Ha, T.W. (2015), “Performance evaluation of conical picks for roadheader in copper mines”, Tunnel and Underground Space, Vol. 25, No. 6, pp. 496-504.
11
Copur, H., Balci, C., Tumac, D., Bilgin, N. (2011), “Field and laboratory studies on natural stones leading to empirical performance prediction of chain saw machines”, International Journal of Rock Mechanics & Mining Sciences, Vol. 48, No. 2, pp. 269-282.
12
Evans, I. (1984), “A theory of the cutting force for point attack picks”, International Journal of Mining Engineering, Vol. 2, No.1, pp. 63-71.
13
Goktan, R.M. (1990), “Effect of cutter pick rake angle on the failure pattern of high strength rocks”, Mineral Science and Technology, Vol. 11, No. 3, pp. 281-285.
14
Jeong, H.Y., Lee, S.D., Jeon, S.W. (2014), “Current and future study on assessment of cutting performance of hard rock TBM in Korea”, The 14th World Conference of the Associated research Centers for the Urban Underground Space, Seoul.
15
Jeong, H.Y., Jeon, S.W. (2016), “Numerical study for estimation of cutting performance of pick cutter”, 2016 Korea-Japan Joint Symposium on Rock engineering, Daejeon.
16
Jeong, H.Y., Cho, J.W., Jeon, S.W., Rostami, J. (2016), “Performance assessment of hard rock TBM and rock boreability using punch penetration test, Rock Mechanics and Rock Engineering, Vol. 49, No. 4, pp. 1517-1532.
17
Jeong, H.Y., Jeon, S.W. (2017), “Characteristic of size distribution of rock chip produced by rock cutting with a pick cutter”, International Conference of Tunnels and Underground Spaces, Ilsan.
18
Kang, H., Jang, J.S., Park, J.Y., Cho, J.W., Jung, M.S., Lee., J.W. (2016), “Method for measuring 3-axis cutting force of a pick cutter using the single-axis load cell array”, Journal of the Korean Society of Marine Engineering, Vol. 40, No. 9, pp. 749-755.
19
Kim, T.H., Jeon, S.W. (2016), “A study on shear characteristics of a rock discontinuity under various thermal, hydraulic and mechanical conditions”, Tunnel and Underground Space, Vol. 26, No. 2, pp. 68-86.
20
Nishimatsu, Y. (1972), “The mechanics of the rock cutting”, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, Vol. 9, No. 2, pp. 261-271.
21
Roxborough, F.F., Liu, Z.C. (1995), “Theoretical considerations on pick shape in rock and coal cutting”, Proceeding of the 6th Underground Operator’s Conference, Kalgoorlie, WA, Australia, pp. 189-193.
22
Tuncdemir, H., Bilgin, N., Copur, H., Balci, C. (2008), “Control of rock cutting efficiency by muck size”, International Journal of Rock Mechanics & Mining Sciences, Vol. 45, No. 2, pp. 278-288.
23
Yang, S.Q., Jing, H.W. (2011), “Strength failure and crack coalescence behavior of brittle sandstone samples containing a single fissure under uniaxial compression”, International Journal of Fracture, Vol. 168, No. 2, pp. 227-250.
Information
  • Publisher :Korean Tunneling and Underground Space Association
  • Publisher(Ko) :한국터널지하공간학회
  • Journal Title :Journal of Korean Tunnelling and Underground Space Association
  • Journal Title(Ko) :한국터널지하공간학회 논문집
  • Volume : 20
  • No :1
  • Pages :161-182
  • Received Date : 2017-12-07
  • Revised Date : 2017-12-29
  • Accepted Date : 2018-01-10
  • DOI :https://doi.org/10.9711/KTAJ.2018.20.1.161
Journal Informaiton Journal of Korean Tunnelling and Underground Space Association Journal of Korean Tunnelling and Underground Space Association
Online Submission & Review System
  • NRF
  • KOFST
  • KISTI Current Status
  • KISTI Cited-by
  • crosscheck
  • orcid
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close