All Issue

2026 Vol.28, Issue 5 Preview Page

Research Paper

30 September 2026. pp. 537-554
Abstract
References
1

Alaloul, W.S., Musarat, M.A., Lim, E.S., Al-Yacouby, A.M., Toloue, I., Rafiq, W., Farooq, W. (2021), “Multi-nozzle abrasive water jet for oil and gas platforms decommissioning: A review”, Civil Engineering and Architecture, Vol. 9, No. 6, pp. 2062-2076. https://doi.org/10.13189/cea.2021.090634

10.13189/cea.2021.090634
2

Awad, M., Khanna, R. (2015), “Support vector regression”, in Efficient Learning Machines, Apress, Berkeley, CA, pp. 67-80. https://doi.org/10.1007/978-1-4302-5990-9_4

10.1007/978-1-4302-5990-9_4
3

Bergman, F., Anderberg, S., Krook, J., Svensson, N. (2022), “A critical review of the sustainability of multi-utility tunnels for colocation of subsurface infrastructure”, Frontiers in Sustainable Cities, Vol. 4, Art. 847819. https://doi.org/10.3389/frsc.2022.847819

10.3389/frsc.2022.847819
4

Breiman, L. (2001), “Random forests”, Machine Learning, Vol. 45, No. 1, pp. 5-32. https://doi.org/10.1023/A:1010933404324

10.1023/A:1010933404324
5

Cha, H.J., Park, J.S., Song, K.I., Park, J.H., Oh, T.M. (2025), “Experimental investigation of cutting performance for cast iron pipe in utility tunnel”, Geomechanics and Engineering, Vol. 41, No. 1, pp. 43-58. https://doi.org/10.12989/gae.2025.41.1.043

10.12989/gae.2025.41.1.043
6

Ebrahimkhanlou, A., Salamone, S. (2018), “Single-sensor acoustic emission source localization in plate-like structures using deep learning”, Aerospace, Vol. 5, No. 2, Art. 50. https://doi.org/10.3390/aerospace5020050

10.3390/aerospace5020050
7

Friedman, J.H. (2001), “Greedy function approximation: A gradient boosting machine”, The Annals of Statistics, Vol. 29, No. 5, pp. 1189-1232. https://doi.org/10.1214/aos/1013203451

10.1214/aos/1013203451
8

Geurts, P., Ernst, D., Wehenkel, L. (2006), “Extremely randomized trees”, Machine Learning, Vol. 63, No. 1, pp. 3-42. https://doi.org/10.1007/s10994-006-6226-1

10.1007/s10994-006-6226-1
9

Hoerl, A.E., Kennard, R.W. (1970), “Ridge regression: Biased estimation for nonorthogonal problems”, Technometrics, Vol. 12, No. 1, pp. 55-67. https://doi.org/10.1080/00401706.1970.10488634

10.1080/00401706.1970.10488634
10

KALIS (2025), Facility status subject to the Special Act on the Safety Control and Maintenance of Establishments, Korea Authority of Land & Infrastructure Safety, https://www.kalis.or.kr/wpge/m_785/public/public0801/2023/public080101_2023.do (September 11, 2026).

11

Kartal, F. (2017), “The kerf analysis in abrasive waterjet machining of ductile cast iron”, Proceedings of the 2017 WJTA-IMCA Conference and Expo, New Orleans, LA, Paper A5.

12

Lee, J.M., Moon, Y.C., Seo, T.W. (2023), “Development of utility tunnel inspection using angle spoke wheel”, Proceedings of the KSME 2023 Conference, Busan, pp. 69-70.

13

Mohebbi, H., Li, C.Q. (2011), “Experimental investigation on corrosion of cast iron pipes”, International Journal of Corrosion, Vol. 2011, Art. 506501. https://doi.org/10.1155/2011/506501

10.1155/2011/506501
14

Park, G.Y., Lee, C.K., Kim, J.T., Kwon, K.C. (2006), “Pipe corrosion analysis by time-frequency distribution and ridge pattern”, Proceedings of the SICE-ICASE International Joint Conference 2006, Busan, pp. 1570-1573. https://doi.org/10.1109/SICE.2006.315448

10.1109/SICE.2006.315448
15

Park, J.H., Song, K.I., Oh, T.M., Cha, H.J., Choo, Y.H. (2024), “Workspace analysis for the replacement and transfer of facilities in aging utility tunnels in Korea”, Journal of Korean Tunnelling and Underground Space Association, Vol. 26, No. 6, pp. 623-632. https://doi.org/10.9711/KTAJ.2024.26.6.623

10.9711/KTAJ.2024.26.6.623
16

Shahrour, I., Bian, H., Xie, X., Zhang, Z. (2020), “Use of smart technology to improve management of utility tunnels”, Applied Sciences, Vol. 10, No. 2, Art. 711. https://doi.org/10.3390/app10020711

10.3390/app10020711
17

Sim, Y.J., Jin, K.N., Oh, W.J., Cho, C.Y. (2017), “Development of evaluation model for optimum design of multi-utility tunnel in urban area”, Journal of Korean Tunnelling and Underground Space Association, Vol. 19, No. 3, pp. 437-447. https://doi.org/10.9711/KTAJ.2017.19.3.437

10.9711/KTAJ.2017.19.3.437
18

Song, K.I., Oh, T.M., Park, J.H., Cha, H.J. (2024), “Rapid cutting, replacement, and transfer technology for aging facilities within the utility tunnels”, KSCE Magazine, Vol. 72, No. 1, pp. 36-39.

19

Tyč, M., Hlaváčová, I.M., Barták, P. (2022), “Analyses of vibration signals generated in W. Nr. 1.0038 steel during abrasive water jet cutting aimed to process control”, Materials, Vol. 15, No. 1, Art. 345. https://doi.org/10.3390/ma15010345

10.3390/ma1501034535009491PMC8745845
20

Xu, C., Du, S., Gong, P., Li, Z., Chen, G., Song, G. (2020), “An improved method for pipeline leakage localization with a single sensor based on modal acoustic emission and empirical mode decomposition with Hilbert transform”, IEEE Sensors Journal, Vol. 20, No. 10, pp. 5480-5491. https://doi.org/10.1109/JSEN.2020.2971854

10.1109/JSEN.2020.2971854
Information
  • Publisher :Korean Tunneling and Underground Space Association
  • Publisher(Ko) :한국터널지하공간학회
  • Journal Title :Journal of Korean Tunnelling and Underground Space Association
  • Journal Title(Ko) :한국터널지하공간학회 논문집
  • Volume : 28
  • No :5
  • Pages :537-554
  • Received Date : 2026-09-11
  • Revised Date : 2026-09-21
  • Accepted Date : 2026-09-21